SSR GTX01 18x9.5 5x114.3 22mm Offset Flat Black Wheel Import Image Racing 18x9.5 SSR GTX01 Flat Black Darkside Motoring SSR GTX01 18X9.5 5X114.3 +15 Offset Dark Silver SSR GTX01 18X9.5 5X114.3 +22 Offset Flat Black Pre Order SSR GTX01 (Dark Silver) 5x100 18x9.5 +40 Hausofwheels. SSR one piece wheels are seamless, precise, light weight, and strong. SSR manufactures all one piece wheels with SSF technology. SSR starts with an MHD (Magneto Hydro Dynamics) billet piece of aluminum which is heated to a semi solid semi molten state. The material is then pressed in through the SSF machine at an extremely high rate creating the wheel. It is then cooled down and cleaned via air gun. The wheels are thoroughly inspected for imperfections and are sent to the painting process. CENTER PART WITH SYMBOLIC DIMPLE Ultralight design that eliminates even slight flesh. The dimple engraved at the base of the spokes at the center part is lightweight technology adopted by racing wheels. Weight control technology applied after thorough strength analysis of size and depth does not affect strength or rigidity. SPOKE LINE The disc is a direct design of the GT500 racing wheel. While shaping to the limit for weight reduction, it realizes overwhelmingly high rigidity by adopting 10 spokes that excel in structural balance. The spoke is a model that increases or decreases the thickness of the side for each V shape. This is also the result of piercing lightness and stiffness from both sides. RIM FLANGE The disc has a rim over design that extends the tip of the spoke to the rim flanges. The biggest aim of this design is to firmly support the flanges where stress is concentrated with spokes and increase rigidity. The top surface of the cast logo engraved on the rim is cut + clear painted. There is no limit to the finish.